SCBH15 type amorphous alloy dry transformer

The liquid metal of the appropriate component of the SCBH15 amorphous alloy dry transformer, at a cooling rate of about 1 million degrees Celsius per second, the alloy obtained by rapid solidification is because its atoms have been solidified before crystallization, and the alloy has similar to the alloy similar Soft magnetic properties of glass's non -crystalline atomic structure and advantages.

Features

1. Ultra -low loss characteristics, high energy and electricity efficiency of energy and electricity;

2. The use of low energy and its ultra -low loss characteristics when the amorphous alloy material is manufactured, which can greatly save power consumption and reduce power plant power generation. Relatively reduce the emissions of SO2 and CO2 exhaust gas to reduce environmental pollution and greenhouse effects, exempt maintenance of maintenance , No pollution;

3. Low operating temperature, slow insulation aging, and long service life of transformers;

4. High overload capacity, high mechanical strength;

5. In the non -crystal iron core, when passing through a higher frequency magnetic flux, it still has the characteristics of low -iron damage and low -magnetic current and does not cause the core of iron core to be saturated. Therefore The type transformer has a good harmonic ability;

6. Fast investment recycling efficiency;

Environmental conditions

Altitude: ≥3000M

Maximum temperature:+50 ℃

Minimum temperature: -10 ° C (minimum storage temperature -30 ° C)

Maximum daily average temperature: +30 ℃

Maximum annual average temperature: +20 ℃

According to user needs, transformers that exceed the above -mentioned conditions can be provided

SC (B) H15 series unlimited voltage pressure dry -type dry power distribution transformer technical parameters